概述
myc-sam9x35 核心板是深圳市米尔科技有限公司推出,基于 atmel at91sam9x35 处理器的 arm9 核心板,该款产品属于 myc-sam9x5 系列核心板中的一款。
myc-sam9x35 核心板正面图:
图1 myc-sam9x35 核心板
myc-sam9x35 核心板背面图:
图2 myc-sam9x35 核心板背面图
关于 myc-sam9x35 核心板软硬件资源,请查看 myc-sam9x5 系列核心板 中的详细介绍。
chip introduction
a highly-integrated 400 mhz arm926 embedded mpu, featuring a rich set of connectivity and user interface peripherals, including ethernet mac and dual can. the graphics lcd controller features 4-layer overlay and 2d acceleration (picture-in-picture, alpha-blending, scaling, rotation, color conversion), and a 10-bit adc that supports 4- or 5-wire resistive touchscreen panels. additional interfaces include a soft modem supporting exclusively the conexant smartdaa line driver, hs usb device and host, fs usb host, two hs sdcard/sdio/mmc interfaces, usarts, spis, i2s and twis. a multi-layer bus matrix associated with 2 x 8 central dma channels as well as dedicated dmas support the high-speed connectivity. the external bus interface incorporates controllers for 8-bank ddr2/lpddr, sdram/lpsdram, static memories, and specific circuitry for mlc/slc nand flash with integrated ecc. the sam9x35 is available in a 217-ball bga package with 0.8mm ball pitch.
cpu logic diagram
key parameters for sam9x35
parameter |
value |
flash(kbytes) |
0 |
pin count |
217 |
max. operating frequency |
400 mhz |
cpu |
arm926 |
hardware qtouch acquisition |
no |
max i/o pins |
105 |
ext interrupts |
105 |
usb transceiver |
3 |
quadrature decoder channels |
0 |
usb speed |
hi-speed |
usb interface |
host, device |
spi |
2 |
twi (i2c) |
3 |
uart |
7 |
can |
2 |
lin |
4 |
ssc |
1 |
ethernet |
1 |
sd/emmc |
2 |
segment lcd |
0 |
graphic lcd |
yes |
video decoder |
no |
adc channels |
12 |
adc resolution (bits) |
10 |
adc speed (ksps) |
440 |
analog comparators |
0 |
resistive touch screen |
yes |
dac channels |
0 |
dac resolution (bits) |
0 |
temp. sensor |
no |
crypto engine |
no |
sram (kbytes) |
32 |
eeprom (bytes) |
0 |
self program memory |
no |
external bus interface |
1 |
dram memory |
ddr2/lpddr, sdram/lpsdr |
nand interface |
yes |
picopower |
no |
temp. range (deg c) |
-40 to 85 |
i/o supply class |
1.8/3.3 |
operating voltage (vcc) |
0.9 to 1.1 |
fpu |
no |
mpu / mmu |
no/yes |
timers |
6 |
output compare channels |
6 |
input capture channels |
6 |
pwm channels |
4 |
32khz rtc |
yes |
calibrated rc oscillator |
no |